×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

The method for electrochemical studies on the behavior of gray cast iron in sulfuric acid electrolyte during recovery of machine parts electroplating galvanizing

Abstract

The method for electrochemical studies on the behavior of gray cast iron in sulfuric acid electrolyte during recovery of machine parts electroplating galvanizing

Zakharov Yu.A., Musatov G. A.

Incoming article date: 17.04.2015

The implementation of electrochemical research is needed to identify the nature and magnitude of the impact of the main technological factors on the processes taking place during anodic etching of grey cast iron in the electrolyte on the basis of sulphate of zinc. The main technological factors that affect electrochemical processes occurring, is the temperature and acidity of the electrolyte, the concentration of the basic salt of zinc in the electrolyte and other components, the speed of flow of the electrolyte in the cathode space, the cathodic and anodic current density, rotation speed of the electrode, modes of mechanical activation. Electrochemical studies were carried out in three modes: potentiometric, potentiostatic and galvanostatic. Resulting in the obtained polarization curves for all three modes. To identify the degree of influence on the growth of the limiting cathode current density of mechanical activation of the cathode surface was carried out electrochemical studies, which were obtained cathode potentiometric curves. These studies took place with anode under similar research conditions in the same laboratory setting. The main difference cathodic electrochemical studies was that mechanical activation of the rotating electrode was carried out by introducing into the electrochemical cell of the lever, with a fixed abrasive material, pressing it against the surface of the test electrode. Thus, this electrode has already played the role of the cathode. Conducting electrochemical studies of the behavior of iron in sulfuric acid electrolyte galvanizing by etching, mechanical activation of the cathode surface and deposition of the electroplated layer, allowed us to obtain sufficient experimental data to identify rational modes of electrolysis at all stages.

Keywords: technological factor, electrochemical studies, polarization curves, electrochemical cell, electrode potentiostat