×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

  • Change EFP materials PZT system by combining

    Piezoelectric ceramics on the basis of the phase of (1-x) PbTiO3-xPbZrO3 is the basis of most high-performance piezoelectric materials. Electrophysical and mechanical properties of these materials can vary widely in different ways. Traditional methods include changes in composition within the morphotropic region and doping. Now is the study of the influence of topical makrolegirovaniya the material properties of the PZT system. As a model system was selected phase of the PZT system, the compositions of which MO belong, one of which contains a dopant in the sublattice (A) and another - in the sublattice dopants (B). The studies established that one of the effective ways of varying the parameters piezomaterials may be the formation of solid solutions on the basis of two or more piezoelectric phases having different combinations of electrical parameters  

    Keywords: Piezoelectric ceramics, doping, kombinorovanie, pezofaza, piezo

  • Methods for the synthesis of LaMnO3 (Review)

    "This review covers various methods of synthesis LaMnO3 ferroics. The general analysis of the solid-phase synthesis reactions methods and wet methods (sol-gel, sorption, co-precipitation) are carred out. The original results of LaMnO3 syntheses from various precursors by means of the in situ method are showned. The advantages and disadvantages of different methods of synthesis are determined. The analysis of synthesis LaMnO3 ferroics published data is shown:
    - the structure formation of LaMnO3 in perovskite-type phases occurs at different temperatures, depending on precursors states;
    - LaMnO3 perovskite phases differ in symmetry and unit cells parameters at room temperature, depending on the preparation conditions;
    - the highest synthesis temperature of LaMnO3 are typical for solid phase reactions method (950-1050 ° C), the lowest - for wet synthesis methods (500-700 ° C);
     - the synthesis conditions effect the stoichiometry of LaMnO3 for oxygen content.
    Our studies of structure formation processes of LaMnO3 by in situ method are allowed to define the role of precursors states at synthesis of solid phase reactions methods, adsorption, co-precipitation and sol-gel mixtures.
    It is determined that in samples prepared by wet chemical methods, the formation processes of  LaMnO3 perovskite phases occur at lower temperatures than by solid phase reaction (sol-gel precursor - 500 <T <600 ° C; precursors obtained by coprecipitation and sorption methods - at 600 <T <700 ° C and 700 <T <800 ° C, respectively).  

    Keywords: ferroics, LaMnO3, X-ray diffraction, solid-phase synthesis, sol-gel synthesis, sorption, co-precipitation

  • Flexible piezocomposites with mixed connectivity phases in the system

      Laboratory technology was developed to fabricate flexible piezocomposites with ferroelectric phase - polymers having signal reception factorv • gv 5000 • 10-15 m2 / N. The values of the given coefficient were achieved by switching from a probabilistic (spontaneous) percolation to a correlated one in the process of forming material. This made the production of 0-1–3 piezocomposites, in which a part of piezophase has 0 connectivity, and the other part – 1 connectivity possible. To improve the efficiency of piezocomposite polarization before their manufacturing the surface of piezophase particles, which were obtained by the partial destruction of the porous frameworks, was treated with coupling agent, which did not only improve the polymer adhesion to piezophase, but also allowed the removal of water from the particle surface. The latter effect reduced the value of interfacial conductivity, i.e. prevented the voltage drop of the polarizing field. Matching of polymer conductivity and piezoceramic particles by determining the optimal polarization temperature was carried out as well.  

    Keywords: piezocomposites, percolation, connectivity, electrophysical properties

  • Methods of the porous piezoelectric ceramics frames microstructure construction

      Influence of a method of manufacture of porous ceramic frames on the basis of system Lead zirconate titanate (PZT) on their microstructure is set. It is shown that when using a method of formation of the frame based on deleting a porophore, the microstructure of a target product depends as by nature a steam generator, and the sizes of particles of a porophore and piezo-phase. Frames with preferentially open nature of porosity create porophore systems decaying or being sublimed in case of temperature increase.  If the porophore to its thermal destruction or evaporation melts, the ceramic frame will have, preferentially, closed nature of porosity. Within the second of probed methods of porous frames creation based on expansion of an amorphous phase, synthesized within a method volume «chemical construction», samples with diameter of pores from 70-90 nanometers to 450-500 nanometers and the mixed nature of porosity are received.

    Keywords: ceramic frames, piezoelectric phases lead zirconate-titanate (PZT), piezoelectric composites with connection 3 - 3 and 3 – 0

  • Control methods of microstructure construction process of piezoelectric ceramics based on doped titanate lead and its electrophysical properties

    The article describes methods allows to control the degree of anisotropy piezoelectric ceramics based on doped phase PbTiO3. As a model of the object has been selected phase of Pb0,76Ca0,24Ti0,94(Cd0,5W0,5)0,06O3. The model phase was obtained by the following methods: by solid state reaction method and the chemical construction. For comparison phases obtained by these methods were used modern analytical research methods (DTA, TGA, XRF, XRD, power and tunneling microscopy, computer-program research results). Piezoceramic samples were obtained from the synthesized phases and electrical parameters were measured. Were revealed that the samples, obtained from the charge, synthesized by chemical construction had values of  piezoelectric constants d31 and d33 much more than samples obtained by the method of solid state reaction.
    Keywords: piezoelectric ceramics, anisotropy, ultrasonic issue systems.

    Keywords: piezoelectric ceramics, anisotropy, ultrasonic issue systems

  • Technological methods of increasing the Curie point of PZT piezoceramic phase

    It was investigated the influence several additives and process parameters on the properties of piezoelectric ceramics based on PZT phase systems. It was shown that the use of the substitution of Pb2+ ions on the Bi3+, and Ti4+ ions, and Zr4+ to Fe3+ and Mn4+, as well as the method of "chemical assembly «allows to obtain increase the Curie temperature of ceramic samples of 50 - 170°C. The theoretical aspects of this area of research have been discussed in this article.

    Keywords: ferroelectric phase, Curie temperature, ceramics, precursors, perovskite, a solid-state method, a method of «chemical assemblage

  • Information about authors (№2, 2012)

    Information about authors of issue №2 (2012)

    Keywords: authors