The article updated issue of the ideas about the success in the national psychology . It is noted that the implementation of a successful career in modern conditions is possible only if the formation of a holistic way of career. Describes how to identify the relationship of career orientations and beliefs about the success of the students enrolled in engineering degrees .

Keywords: career, career orientation , success, the success of the submission , the submission of a career , career path , a student

Examines the problem of urban transport infrastructure in terms of rational organization of maintenance and repair of cars on the principle of optimal placement of workshop on urban land and services offered. The factors, allowing to solve the problem of the randomness of the location of such enterprises.

Keywords: Maintenance and repair of motor vehicles, auto service facilities, rational layout, the list of services, quality, factors, Tyumen region

Abstract: This article explores the options and features profiles "citizenship and patriotism," designed for the study of general cultural competence of students by self-assessment. As a measurement model used polytomous Rasch model. Incoming data obtained via the questionnaire "citizenship and patriotism," The characteristics of survey participants and indicators profiles, proved their suitability to assess the level of formation of personal qualities that affect the general cultural competence. Recommendations to finalize the questionnaire.

Keywords: the level of training students, latent variables polytomous model indicator, diagnostics, competence

The relevance of this article stems from the situation in the energy sector. For issues of a more efficient use of the thermal capacity of industrial wastewater this article describes the method of determining the efficiency of heat utilization of industrial wastewaters produced during the implementation of thermal processes of service enterprises, as secondary energy. Conducted system analysis of the technological regime cards washing clothes in order to identify the energy potential of wastewater. Based on the analysis of the conditions of production of thermal equipment is composed of a heat balance, thermal process equipment, the methods of determining the heat capacity of industrial wastewater and the amount of saved fuel by use of this energy potential. As the calculation of the financial cost of additional heat exchanger regenerative type, the use of which allows to implement a system of heat utilization of industrial waste water as the heating fluid.

Keywords: Energy efficiency, heat balance, energy, vapor, liquid, sewage, heat capacity.

Improvement of technological process of galvanizing in flowing electrolyte without decrease in its reliability and quality of the received deposit can be carried out by carrying out anode etching of the processed surface directly in the main electrolyte of sedimentation. And, providing such conditions of anode etching at which, the details which are formed on a surface products of reactions easily are removed a channel of electrolyte is possible. For the purpose of identification of extent of influence of technology factors on anode dissolution of the processed surface it is necessary to conduct elektrokhikmichesky researches. The installation including electric was for this purpose developed and made and gidravklichesky speak rapidly. The Elektkrichesky part contains power-supply circuits of an electrolytic cell to the asymmetric variables odnopoluperiodno straightened, dvukhkpoluperiodno straightened by current and straightened by current with the lowered pulsation, and also a chain of heating of working electrolyte. The hydraulic scheme of experimental installation includes: the kisloktostoyky electric pump, pipelines, filters, the device for an electrolytic precipitation of coverings and a bathtub with electrolyte. Electrolyte in a cell moved by means of the electric pump. Giving changed in steps, due to change of diameter of the section through passage of the giving pipeline by means of replaceable inserts. Authors of the device for electrolytic drawing coverings are Zakharov Yu.A. and Spitsyn I.A. (patent No. 2155827). The design allows: to increase the speed of a channel of electrolyte; to carry out activation of the cathode, using energy of a channel of electrolyte; to increase the accuracy of copying of the cathode the activating elements; to use higher density of current and to reduce power consumption of the device. Electrolyte, in the course of sedimentation, was constantly filtered. As filtering material used fiber glass. The filter if necessary it is possible to dismantle and wash out quickly. Such filtering element slightly interferes with a channel of electrolyte, is simple in service, is cheap and quite sufficient. Thus, the offered design of experimental installation allows to conduct necessary researches of process of sedimentation of a zinc electrodeposit for its improvement.

Keywords: case detail, restoration, repair, defect, resource way of restoration, car repair production

Visualization analysis methods allow researchers to detect features at a glance, identify patterns and anomalies in large volumes of information. Value of medical imaging in health care is increasing, as it improves the efficiency of care and create a more comfortable environment for patients. Innovative imaging technologies allow earlier and more accurately diagnose diseases, treat them more purposefully through more benign methods, and carefully monitor the results of treatment. This paper discusses the use of different imaging techniques of experimental medical data (for example, studies of the physiological characteristics of patients with various forms of asthma) . Novelty of this work is to use an integrated approach to solving the problem of state visualization of biological objects. Results of application of various technologies of visualization of medical data on the example of an assessment of dynamics of a condition of patients by bronchial asthma as a result audiovisual stimulation of a brain are presented.

Keywords: visualization, cognitivegraphics, iconplots

Nowadays, the main way to improve power density is increasing the junction temperature of semiconductor devices and as a result, increasing the temperature of the heat sink. This results in a lower efficiency due to the high temperature caused by increasing power losses. To solve this problem, it’s possible to develop the heat sink for a specific system, or to optimize existing heat sink profiles. This paper presents an FEM-analysis describing thermal behavior of a bidirectional switch used in a direct matrix converter.

Keywords: bidirectional switch, heat exchange, thermal behavior, finite element method

Recently becoming urgent problem of managing distributed processes of production, transmission and consumption of energy. This fact is associated with the emergence of a significant number of generators and the possibility of a primary control on all elements of the grid. In this connection, in proposed three-level distributed power grid management, which includes the upper level of segmentation networks, distributed control average frequency and power level and a lower primary control. The methods of control for each of the above levels, the results of simulation.

Keywords: smart grid management system, distributed control, frequency control and power.

The analysis of domestic innovative solutions describing shock devices. Topical area of research is to reduce the dimensions of such devices while maintaining their energopogloschatelnoy capacity and use of new materials such as shape memory alloys. A method for testing such devices with elements made from these materials.

Keywords: shockproof devices, dimensions, energopogloshchayushchaya ability, alloys, shape memory, the method of testing

The algorithms of analytical approximations of gravity field on the basis of F-approximation. Presented results of the re-sampling techniques F-approximation on the materials detailed gravity survey.

Keywords: gravity field, F-approximation, spectral analysis, the Terek-Caspian trough, Argudansky site

Production of sodium hypochlorite as disinfectant agents to clean water, suitable to be deployed on the basis of a thermal power plant or nuclear power plant. Power plant-manufacturer GHN can profit from its implementation. The proposed scheme will facilitate rapid and efficient transfer of rural water supply in an environmentally and safer water treatment technology.

Keywords: sodium hypochlorite, water, disinfection, disinfectant, concentration, ecology

A comparative analysis of the results of numerical studies of the shear strength of the two most common models fragment joint compound reinforced concrete floor slab with a column of monolithic buildings with punching and heating. Simulation of stress-strain state of concrete samples conducted in LIRA 9.6 R9 with various combinations of loads and effects in the nonlinear formulation to study the processes of their destruction. Revealed new features of the stress-strain state of reinforced concrete monolithic buildings with bezrigelnym frame with an alternative design scheme that reflects the true picture of loading plate and corresponds to the method of Eurocode 2.

Keywords: connection node reinforced concrete slabs with a column, monolithic building with bezrigelnym frame, strength plates with cut and bursting under heat, non-linear analysis

In this article the author considers the gasdynamic bearing with the spiral flutes which active zone is formed by two close located firm surfaces, on one of which spiral microflutes are executed. The oblique-angled system of coordinates consisting of logarithmic spirals and circles is entered. For each dyad a flute crossing point values of powers of viscous friction were received and further their main moment of resistance concerning a bearing axis is calculated, expression for the main moment of forces of resistance is found in a smooth layer. In work the algorithm, allowing to calculate the main moment of powers of the viscous friction developing in a lubricant layer of the gasdynamic bearing with spiral flutes is received.

Keywords: gasdynamic bearing, spiral flutes, oblique-angled coordinates, resistance moment

The uncertainty is investigated and regularities of their impact on production systems, taking into account the search management strategies. It is proved, that uncertainty is a parameter that accompanies any productive activity for the period of the projection; due to a number of laws (integrativnost′û, integrity, communication, hierarchical structure, osuŝestvlâemost′û, etc.); is based on two basic scenarios: conservative and innovation Are key factors of uncertainty. (information, bureaucratic, change the value of the currency, sanctions, stagnation and so on) in the development of targeted corrective measures on projected periods.

Keywords: Uncertainty and their patterns, parameters, key factors of production systems management, corrective actions

To date, questions the reliability and continuity of electrical energy production facilities are among the most urgent , due to the transition generation companies into private hands and aggravate financial, economic and industrial- technological challenges : depreciation and obsolescence of equipment, lack of investment and other factors, influencing the power producers .
The article discusses the various valuation techniques of industrial enterprises and industrial complexes electricity . On the basis of their proposed universal method of estimating production complexes electricity , which is divided into 6 groups and includes weights . The article noted that the proposed method of estimating the weight of electric power systems operation has several advantages compared with the methods of other authors.

Keywords: electricity, electricity production complexes, investment, reliability, development