×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

  • Universal unmanned platform based on the Pelets snow and swamp vehicle

    The article discusses the development of innovative technology - an unmanned universal platform based on the Pelets snow and swamp-going vehicle, the key features of which are: the ability to quickly re-equip for various types of operations, the ability to perform work using remote control technologies, as well as high cross-country ability up to the crossing of water obstacles. The equipment is designed to perform a wide range of works: soil development, transportation and movement of goods, fire extinguishing, lifting and transport operations.

    Keywords: versatility, snow and swamp vehicle, cross-country ability, remote control, quick conversion

  • The layout of the combined machine based on the KamAZ vehicle

    The construction of winter roads in the Russian Federation is determined by the geographical location and climatic features. Most of the territories are located in unfavorable climatic zones, and there are also settlements, accessibility to which can be realized by means of temporary roads. The process of erecting such engineering structures is expensive and labor-intensive. In order to reduce costs, it is necessary to modernize technologies and ground transport and technological facilities. The proposed combined machine based on the KamAZ vehicle is a technical solution that allows to reduce the time and cost of building winter roads. The article considers the configuration of components and assemblies of a modernized machine for the construction of winter roads based on KamAZ, as well as a calculation of the power balance.

    Keywords: winter road, melting, technique, power source, consumers, balance, versatility, economy, application, working units

  • Snow blower upgrade with swiveling V-blade

    At present, despite the variety of mini-loaders in terms of purpose and type of work performed, the problems associated with the technology of snow removal from roads and adjacent areas remain relevant. Along with the continuous growth of the municipal machinery fleet, qualitative changes are constantly being made to its working equipment, aimed at increasing the productivity and efficiency of the snow removal process through the introduction of new rational and technical solutions.

    Keywords: mini-loader, blade, snow removal, working equipment, snow cover, compaction, hydraulic cylinders, shock absorbers

  • Mathematical modeling of the heat accumulator system for thermal preparation of special equipment

    In the context of the autonomous functioning of special equipment in the Far North and the Arctic is necessary to use its internal resources to maintain optimal thermal state units and units. This can be accomplished using a heat recovery system of the internal combustion engine. For this purpose the heat accumulator. The mathematical modeling of the thermal state of the heat accumulator in the cooling stage. The main factors affecting the cooling time of the thermal battery: TA insulation thickness, weight coolant, coolant temperature, air temperature, wind speed. Also developed a mathematical model of the process of cooling the heat accumulator in general terms. It is presented in graphical form, which simplifies the determination of the time of cooling the heat accumulator in its design. For the definition of Q and Bi developed a program «Time».

    Keywords: operation, heat storage, thermal preparation, heat transfer, heat recovery system, low negative temperature

  • The impact of negative temperatures on the condition of polyethylene pipes in bending

    in modern conditions become widespread trenchless methods for the construction of pipelines. The positive features of their use include increased speed pipeline installation, reducing the volume of excavation, etc. Existing regulatory documents limit the bending of the pipe at low temperatures need to be tested in terms of their applicability to new grades of polyethylene. The aim of this study was to determine the minimum permissible bending radius of the track, the passage of which in the conditions of negative temperatures polyethylene pipes PE80 would maintain its strength characteristics. By using a mathematical model dependency of the elastic modulus and yield point are calculated from the temperature stresses in the walls of pipes of different diameters in bending under different temperatures. In order to establish empirical relationships voltage on the pipe diameter and the radius of its bend procedure is carried out function approximation method of least squares. Presented obtained graphic dependences. Using the values ​​of the yield strength of the material at different temperatures were calculated bending radius of all dimensions. If the production of the track plow trenchless pipe-layer will be considered given the conditions, you will be provided with the necessary conditions for installation.

    Keywords: plastic pipe, trenchless pipe layer, the stress-strain state, trenchless techniques, pipelining

  • Development of the construction of blade snowplow for the urban environment

    for snow removal from roads used by different snow-clearing equipment. The efficiency of its use is determined by the road conditions. This is especially true for snow plows in settlements with elements of arrangement of road (curbs, sidewalks, road barriers, stopping points). In these circumstances widespread machine dumps. The ability to develop, manufacture and operation of dumps of snow plows on small and medium-sized enterprises defines their widespread use and a variety of designs. Promising to modernize the necessary conditions under heaps of snow removal from roads and sidewalks. The decision in this case take into account the comprehensive approach, comprising as an account of the influence of external factors - the operating conditions of the machine, and internal changes in the parameters of the machine. Analysis of the problem has allowed to hypothesize on the design of blade snow removal machines. In order to develop a scheme blade methodology for the study and design of experiments, the basic factors of influence on the resistance. The design blade for snowplows and virtual model to assess performance.

    Keywords: Blade, modernization blade, snowblower, snow removal from roads, research blade

  • Experimental studies warming hydraulic drive construction machinery exhaust gases ICE

    One source of thermal energy for heating hydraulic road construction machinery, operating in Russian regions with severe climatic conditions, are recyclable heat internal combustion engine exhaust gases. The article investigates the warm working hydraulic fluid hydraulic drive construction machinery diesel engine exhaust gases. With the aim of reducing warm-up time suggested the use of small hydraulic drive hydraulic tank with a heat exchanger. To study an experimental setup that is mounted on the loader Mustang 3300V. Experiments were carried out in the winter, warming the working fluid exhaust gases are two modes of internal combustion engines - at no load and at medium speed. Dynamics of thermal processes was recorded by an electronic memory recorder. As sensors used thermometers - resistance. As a result, it was obtained according to the temperature of the working fluid from the hydraulic tank warm-up time.

    Keywords: heating hydraulic drive, hydraulic tank, heat recovery, construction machinery, hydraulic fluid

  • Improving the efficiency of a snowplow blade for snow removal for road barriers

    analysis of the conditions of movement of vehicles on the roads has shown that special difficulties arise in the winter. This is due to the quality of the work of snowplows. One problem is the snow removal for road barriers. In line with this, and considered the possibility of the need to improve, creating a Russian-made snow plows. Based on the analysis of schemes snow removal from roads, structures working bodies with piles of snow plows, proposed a new design that allows for snow removal for road barriers, as well as the proposed use of a working body under a snowplow clearing patrol roads. At the expense of achieving the universality of cars increased their rate of use and, therefore, the payback period. The effectiveness of implementation of the new structure of the working body of the snowplow is achieved by reducing the amount of used equipment and passes undertaken during snow removal

    Keywords: Blade, modernization blade, snowblower, snow removal from roads, road protection

  • Structural adaptation of equipment for excavation works

    The article describes the working conditions of earth-moving machinery. The main ones are climatic and groundwater. At the same time in different conditions the potential of machinery is not used efficiently, ie they do not dogruzheny of the energy supplied in the working process of interaction of the ""working body - the ground"" or overwhelmed. It was determined that the basic properties of machines that determine the quality of reliability, and adaptation to the operating conditions. On this basis, it is determined that there is a possibility to increase their efficiency by adapting the machine to certain operating conditions. In this regard, necessary methods and means for correcting the energy impact of the machine on the ground in its development. This problem is solved by studying the laws of interaction of the working body digger ground. And on this basis the development of control actions on machines (changing its operating speed, cutting depth, cutting angle)

    Keywords: digger, adaptation, adaptation, development of soils, working body, working conditions

  • Resource conservation with snow removal in urban environments

    The article summarizes the purification schemes of roads from snow and used in this machine. Depending on the various possible ways and means of snow removal. In the majority of methods used machines with blade. The analysis of dumps of snow plows and the tendencies of development of the working bodies. Promising to modernize dumps under the conditions necessary snow removal from roads and sidewalks, stopping pockets that are height above the roads. The decision in this case take into account the general trends of development of designs dumps. The most important of which is to increase the mobility of the blade and its division into elements. The use of hydraulic drive allows to simplify the structure of the working body of a snowplow. The effect of the implementation of research results is determined by reducing the number of passes and the number of snow plows used machinery

    Keywords: snow-removal work, construction of dumps, upgrading the blade, snowblower, snow removal from roads, snow removal scheme

  • Sensors to study the thermal state machines operating in the Far North and the Arctic

    In developing training tools thermal units, assemblies and systems of machines operating at low temperatures below zero, should pay more attention to the monitoring of their thermal state. At this point, there are many ways to measure the temperature. All of them are divided according to the principle of action. There are a large number of sensors for measuring temperature, based on these principles. However, when building automation means of thermal preparation machines play a special role performance sensors of different design when used in automation nodes to determine the temperature units, assemblies and systems of machines. At this point in the design automation received widespread microcontrollers, comparators, and which comprise analog-digital converters in a single chip, and also capable of converting analog electric quantities into digital form. This ensures high accuracy.

    Keywords: thermal state thermal training machine, temperature measurement, a semiconductor sensor, a thermistor, a thermocouple, a microcontroller, an analog-to-digital converter

  • Resource conservation with snow removal in urban environments

    An analysis of snowplows in urban environments. Determined that the efficiency of snow removal from roads, sidewalks areas affected humps (bumps), borders, etc. In line with this analysis of structures working bodies (dumps), used in Russia and abroad, as well as analysis of patents. In accordance with the foregoing, all decisions on the management of blade can be divided: extra lever systems; modernization of hydraulic drive; use microprocessors; the combination of these approaches. Obviously, the use of processor technology is justified for high-tech machines, as a consequence has disadvantages in price, qualification of operators and maintenance personnel. For the modernization of existing equipment, at the moment, it is advisable to use the combined system using the lever and hydraulic drive systems. It is necessary to take into account the energy-saving technologies.

    Keywords: snow machines, blade, blade control automation, snow removal from roads, blade control, energy conservation, resource conservation

  • Development of a universal data acquisition system with control functions based on the analog-to-digital converter

    Abstract: Operation of motor transport and special equipment is carried out in difficult conditions, the impact of environmental conditions (temperature, humidity, dust, wind, solar radiation) and changes in modes of operation of the machine. This affects the performance of equipment, the number and complexity of repairs. Away from fixed bases (in the field), the problem is particularly acute repairs. One of the most energy-intensive and expensive works are welding (welding parts with a break, welding cracks, fusing metal layer on the worn surface, metal cutting). In this work the welding equipment affect the voltage drops in the supply mains, therefore, produces a large number of failures such equipment. After the equipment is accompanied by an increased amount of electric power consumption, this results in material costs. Previously proposed equipment has improved mass, which reduces the efficiency of the welding. Based on this study was proposed innovative design welding inverter using the resonance effect, with enhanced reliability, low-cost design version (in terms of mass production). In order to improve the reliability and reduce the cost of the proposed design of inverter proposed a number of new approaches. Full-bridge inverter is studied welding power source with the implementation of the resonance effect with a stable and smooth operation, high reliability, because the circuit of the inverter is not sensitive to changes in the supply voltage.

    Keywords: construction machinery, parts, low temperatures, thermal state, measurement, monitoring, control, sensor, hardware-measuring system

  • Developing a sliding blade snowplow

    based on an analysis of the methods and schemes snow removal from roads and sidewalks it revealed that there is a snow plow, which would be cleaned in a single pass only the side of the road in the middle of the road cleared. At the same time to solve this problem are also two cars. In accordance with this work set a goal: increasing productivity snowplows. To explore this issue were based on the analysis of working bodies of snow plows developed and investigated a new type of dump actuator for snow removal from roads. It was determined that there is an additional resource to increase machine productivity. This is achieved by improving the design of the working body. This will not increase the resistance of the machine, because proposed symmetrical design with rotating blade and sliding half, which will reduce the resistance and to ensure stability.

    Keywords: snow machine, snow removal from roads, snow removal scheme with roads, blade, working body

  • Modeling of heat recovery system of internal combustion engine and special motor vehicles

    A significant number of units and special motor vehicles operated in a low freezing temperatures of the Far North and the Arctic. Preserving the art in these conditions depends primarily on the reliability of the internal combustion engine startup. For this purpose, a means of preparation of heat from external heat sources. In the context of the autonomous functioning of the machine it is necessary to use its internal sources. This can be accomplished using a heat recovery system of the internal combustion engine. To do this, include thermal batteries. In order to increase their efficiency (increasing the thermal capacity, reduce the size) Three constructions of the dual-chamber heat accumulator. To describe the heat transfer of the heat accumulator defines the conditions of uniqueness, according to which a simulation of thermal processes heat storage

    Keywords: operation, heat storage, heat engine preparation, heat transfer, heat recovery system, low negative temperature

  • Experimental study of the Electromechanical actuator of the gravitational mixer

    The results of experimental studies to determine the optimum frequency of rotation of the drum and the optimum ratios of the mechanical gear Electromechanical actuator gravity mixers. Recommendations on the use of different types of actuators depending on the scope of use of the machines.

    Keywords: "gravity concrete mixer, Electromechanical actuator, modular design, experiment, mixing drum rotational speed, induction motor, reducer "

  • Repair of vehicles and special equipment in the field

    Abstract: Operation of motor transport and special equipment is carried out in difficult conditions, the impact of environmental conditions (temperature, humidity, dust, wind, solar radiation) and changes in modes of operation of the machine. This affects the performance of equipment, the number and complexity of repairs. Away from fixed bases (in the field), the problem is particularly acute repairs. One of the most energy-intensive and expensive works are welding (welding parts with a break, welding cracks, fusing metal layer on the worn surface, metal cutting). In this work the welding equipment affect the voltage drops in the supply mains, therefore, produces a large number of failures such equipment. After the equipment is accompanied by an increased amount of electric power consumption, this results in material costs. Previously proposed equipment has improved mass, which reduces the efficiency of the welding. Based on this study was proposed innovative design welding inverter using the resonance effect, with enhanced reliability, low-cost design version (in terms of mass production). In order to improve the reliability and reduce the cost of the proposed design of inverter proposed a number of new approaches. Full-bridge inverter is studied welding power source with the implementation of the resonance effect with a stable and smooth operation, high reliability, because the circuit of the inverter is not sensitive to changes in the supply voltage.

    Keywords: repair, motor trucks, welding, full-bridge inverter welding power source, the resonance effect.

  • Self-powered scraper with snow-grooming machine

    Problems stroitelstvavremennyh winter roads - winter road. The trends in the development of designs snowgroomers machines as a way to reduce the human and economic costs. Shows the design of the unit on the basis of a self-propelled scraper MoAZ-60148

    Keywords: Temporary winter road, winter road, vibratory compaction, snow mass, snow-grooming machine

  • Increase efficiency of high pressure hoses hydraulic drive for operation in harsh environments

    Discusses ways to ensure trouble-free operation of hydraulic drive, a construction of the high pressure hose, which contains carbon-fiber yarn as reinforcement element

    Keywords: Hydraulic drive, uglevolovkno, high pressure hose, pressure, negative temperature

  • Machine for snowmelter

    snowmelter item, thawing, heat balance, thermal conductivity, the intensification of the phase transition.

    Keywords: snowmelter item, thawing, heat balance, thermal conductivity, the intensification of the phase transition.

  • Machine Repair temporary winter roads

    The methods of construction and repair of temporary winter roads, proposed technical solution for creating devices that provide a significant increase in strength, bearing capacity and durability of the repaired snegoledovogo cover winter road at full mechanization of the process of recovery.

    Keywords: Winter road, a temporary winter road, moisturizing, repairing, mechanized complex snow mass, milling machine, load capacity

  • Application of analog-to-digital converter in the evaluation of the thermal state of elements of the hydraulic drive

    The substantiation of the need for the preparation of thermal hydraulic drive road construction machinery (SDM) operating in the North. Given that a significant number of failures falls on hydraulic drive elements, it becomes urgent need to study their work and causes of failures. In order to analyze the thermal training funds, the development of new systems is necessary to study thermal characteristics of hydraulic drive elements SDM operated at low subzero temperatures. It is necessary to take into account the rate of change of the processes occurring in the hydraulic drive. In accordance with the above requires a quality measuring equipment, created on the basis of analog-to-digital converters. For this analysis instrumentation for experimental studies. Currently, at the Department of Transportation and technological systems developed hardware and software for temperature measurement system for monitoring hydraulic drive elements SDM.

    Keywords: construction machinery, operation, negative temperature, hydraulic, thermal preparation, measurement, sensor

  • The load distribution in the adaptive friction clutches of the second generation (Part 1)

    With the increase in the coefficient of friction is a growth of the torque transmitted by the lead pair of friction of the main friction, reducing torque is transmitted by the slave pairs of friction friction core group and a couple of extra friction of the friction. Load transfer in the adaptive friction clutches reduces spacer force and accelerate the growth of the torque transmitted by the friction pair of the main driving frictional group.

    Keywords: the coefficient gain, a separate positive connection, the coefficient of friction, clutch, friction pair

  • The load distribution in the adaptive friction clutches of the second generation (Part 2)

    The coefficient of friction, whereby the total nominal load adaptive clutch transmitted only the leading pair of friction friction basic group is less than the maximum value, which may take the coefficient of friction in actual operation of the coupling. Appearance and an increase in the strength of the spacer when the external load and increasing at an elevated value of the friction coefficient begins at a certain minimum value of the external load, which depends on the total number of pairs of friction of the friction core and the gain. The dependences of the distributions of the torque between the lead pair of friction friction main group and driven friction pairs of basic friction and friction pair of extra friction.  

    Keywords: the coefficient gain, a separate positive connection, the coefficient of friction, clutch, friction pair

  • Kinematic investigation of the mechanism of the ladle turning of the rope excavator

    The research devoted to the kinematic mechanism for turning rope of ladle excavator, in the article considered the part of the trajectory of the work process: this process make the turning of the grip relatively to the arrow with the same time turning ladle relatively to the grip. The ladle turning is made because of additional kinematic connection between the ladle and grip and / jr the arrow and implementing internal forces due to the mutual position of the corresponding arrow and grip.

    Keywords: the rope excavator, the ladle turning, kinematics, the analitical investigation